Infinite Peripherals PP-55ms (AIRCHARGE DM2)

NEW!! Easy to use mid-range card reader and printer device. This device works well for companies in need of a portable unit that can also be used as a counter top unit while at shows or in a customers home. Also used in mounted applications in vehicles.

AIRCHARGE IPC PP-55ms

Features
  • NEW!! Upgraded and lengthened card reader.
    Audible alert if credit card read is good.
  • NEW!! Larger capacity rechargeable 8.4V Li-ion 2000mAh.
    Longer operating life.
  • 3 Track Magnetic Stripe Reader
  • Reliable and durable
  • Great for table-top use or in vehicle mounting
  • 2.25" thermal paper
Applications
  • All Industries
  • Other "hard wired" 12v applications
Specifications - Quick Reference Guide
Printing System Direct Thermal
Resolution 8 dots/mm
Paper 2.25" Thermal
Print Width 48mm(384dots)
Paper Feeding Method Friction feed
Dimensions 200 x 50 x 87 mm
Printing Speed Max 50 mm/sec
Life 50 Km
Operating Environment
Temperature
Humidity

0°C to +45°C
10 to 90% (No Condensation)
Interface RS-232 Male - AIRCHARGE Specific
Power Rechargeable 8.4V Li-ion 2000mAh - AC Trickle Charger
Paper Outer-Dia 48mm , Inner-Dia. 19mm
MSR Track 1, 2, and 3
Options Vehicle Charger, Nylon case with belt clip

Paper Load 1

Paper Load 2
Card Swipe

The PP-55ms uses LED lights to indicate various conditions of operation. This may be charging, printing, out of paper or error conditions.  The following explains these conditions and LED indication:

Printer Status
Battery Charging LED

Solid GREEN = Battery at full charge
Solid RED = Battery charging

ON/OFF LED Solid GREEN = Power ON
Solid RED = Low battery
Fast Blinking = Printer out of paper
Slow Blinking = High temperature error

The PP-55ms paper feed switch/button is used for entering various printer modes. These modes can be used to assist developers in debugging problems related to programming and communication. The following explain how to access the various operating modes.

Operation Modes

Short Push N/A Paper feed
Push and Hold - release after the number of beeps 1 - beep Reserved - For factory use only
2 - beeps Self-test
3 - beeps Hex dump
4 - beeps Reserved - For factory use only
5 - beeps Reserved - For factory use only
Note: Care must be taken when entering operating modes to prevent the clearing of factory preset configuration information.